Pioneers of Pool Lights! Born for Your Swimming Pool!

In 2018, we commenced research and sales of waterproof swimming pool lights. This was followed by the introduction of suction cup waterproof lamps in 2020, and the launch of rechargeable waterproof swimming pool lights in 2022. The year 2023 witnessed the emergence of rechargeable adhesive fixed pool lights, controlled by either remote or app.

Swimming Pool | Above Ground Pool | Fountain Pool | Pool Lights (Remote) | Pool Lights (APP) | Pool Lights (Remote)

NOW!!! Let's take a closer look at the HOMLY 2024 Upgrade Rechargeable Submersible LED Lights...

Underwater or Above Water Installation Steps: A) Choose a suitable position, wipe off any dirt. B) Apply three parallel lines (1/5 of glue) to the sides of the texture. C) Press and hold for OVER 90s, ensuring the plate doesn't move, then release. D) You can usually hang the lights after one hour, but check if the plate is fastened. E) The glue cures completely 12 hours later.

Note: 1. The thin back plate adhered to the wall does not affect the appearance. 2. For metal walls, you can directly attach the lights using the magnet, without glue. 3. These lights can be installed underwater or on a vinyl above-ground pool wall.

Panoramic view of the swimming pool with HOMLY Rechargeable Pool Lights...

Function: Button Control: 8 steady colors, 1 flash mode Remote Control: 16 steady colors, 5 brightness levels, 3 timers (2H, 4H, 6H), 2 flash, 2 fade, 2 smooth modes

The Package Includes: 1 to 4 waterproof pool lights, 1 to 4 sticky plates, 1 remote, 1 bottle of underwater installation glue (supports 5 lights), 1 to 2 USB-C charging cables, and 1 instruction manual.

Why Choose Our Newest Pool Lights? - More safety with full IP68 waterproof design - Suitable for various wall surfaces, adhering firmly underwater - Waterproof USB-C port vs. external, rusty port - Stronger magnet vs. external, rusty magnet - More color-changing modes - Universal USB Type-C cable, rechargeable

Rechargeable Pool Lights! A) When charging, the light flashes red. When fully charged, the red light stays steady for about 3 minutes. B) Long-press the button for 2 seconds to activate, it will light up in white. Then use the remote or button to set colors, modes, brightness, and timers. C) Long-press the button again to turn off the light completely for power saving.

Check if the remote control works: A) Remove the plastic film at the bottom of the remote. B) Press any button, and if the small light on top is on, the remote is working. Otherwise, replace the 1x CR2525 battery.

Upgraded full waterproof and stronger magnet are suitable for: swimming pools, ponds, fish tanks, vases, flower pots, waterfalls, bathtubs, hot tubs, and indoor/outdoor decoration.

product information: